E-Mail-Formatfehler
emailCannotEmpty
emailDoesExist
pwdLetterLimtTip
inconsistentPwd
pwdLetterLimtTip
inconsistentPwd
PNEUMATIC BALL VALVE
Pneumatic ball valves are a kind of pneumatically controlled ball valve and are externally controlled. The driving mechanism is simple and reliable, and can be used in various applications to switch, regulate, or control the flow. The ball valve is normally operated by pneumatic devices.
Product introduction:
The application and material range of pneumatic valves are made of stainless steel, which has corrosion function. Due to the self-lubricating function, the ball and valve seat can be friction free without any grease or. They are evenly distributed, and good sealing ensures no pressure drop. Pneumatic ball valve is a variety of pneumatic automatic control valves. It can be used in many applications to switch, regulate and regulate the execution of flow. The ball valve is externally controlled, and the driving mechanism is simple and reliable. It is usually operated by pneumatic devices.
Pneumatic ball valve is an ideal solution for controlling pneumatic gas. It has excellent flow control or long flow and long maintenance intervals. Pneumatic ball valves are widely used in measurement where accuracy, pressure reduction and / or liquid separation are required. Allows fully isolated / leak free operation and design while providing very low flow characteristics and very low average pressure drop. Pneumatic ball valves are used to control the flow in the piping system because they transfer pressure through the interface in the ball to make the fluid flow. Due to the main characteristics of the sealing characteristics, the pneumatic valve can be opened at low pressure due to its non positive nature.
Product advantages:
Pneumatic ball valve is very similar to check valve. It uses a rising valve to regulate the flow. However, the difference is that we can completely control and limit the flow at one time. The working pressure range of the air ball valve is smaller than that of the check valve, but the operating speed means that when it needs to be opened / implemented accurately within a certain period of time, they are more economical and energy-saving than the check valve. Pneumatic ball valve is a simple and reliable opening device. It uses compressed air to switch between position, off position and automatic mode. Compressed air is supplied by an electric solenoid valve or an electric solenoid valve.
Pneumatic ball valve is a valve used for opening pneumatic valves. It has two identical positions: and closed, the same as the ball check valve. Pneumatic ball valve usually consists of bonnet, valve body and valve rod. It also consists of two steel positions, Inside and outside of one valve body. There are different types of valve body double ball valves: single flow ball valve; Manual, pressure or operating servo or external tripping mechanism; Floating or no floating operation, etc.
It can be used in pipelines and is a good choice for valves. It is not suitable for any control valve in low flow and low flow ordinary petrochemical industry. Its main function is to ensure stable operation during use.
Product design:
Pneumatic full pneumatic design without these moving elements. It is suitable for high circulation and low circulation, in which case it is indeed a ball valve and may be a complete pneumatic valve. Ready, capped and connected for quick start-up.
The pneumatic ball valve is designed for the flow of other gases. The ball valve is designed for the air filter, filter, filter and other applications being filtered, including the flow of pumps and drum valves for various applications. Pneumatic ball valve.
1/2" Inch Pneumatic Single Acting Spring Return Stainless Steel Air Actuated Ball Valve
APIRT Valve PVS series 1/2"-4” Inch FLANGED AND NPT pneumatic air actuated valve ball valve comes with a stainless steel 3-piece ball valve body, it provides a easy installation and maintenance through the slide out body method. This industrial air actuated valve is used to control the on and off of the valve for media such as air, gas, liquid, water and steam. PVS Series air actuated ball valve can be installed with a Tri-clamp end connections for easy line removal and it is ideal for sanitary applications.
PVS series single acting air actuated ball valve use air pressure to open the valve and springs to close the valve. The characteristic of the air actuated ball valve is that it has a higher flow rate, temperature and pressure compare with the direct acting valve. Also it is ideal for the hazardous environments.
Pneumatic Air Actuator Specifications:
| Pneumatic Actuator Specifications | |
|---|---|
| Actuator Standard | ISO 5211, NAMUR, DIN 3337 |
| Operating Pressure Range | Min: 45 PSI - Max:120 PSI |
| Operating Media | Pressurized Filter Air |
| Operating Temperature | –20 to 80°C |
| No. | Name | Qty | Material |
|---|---|---|---|
| 1 | Indicator Screw | 1 | Plastic |
| 2 | Indicator | 1 | Plastic |
| 3 | Spring Clip | 1 | Stainless Steel |
| 4 | Washer | 1 | Stainless Steel |
| 5 | Outside Washer | 1 | PTFE |
| 6 | Body | 1 | Extruded Aluminum Alloy |
| 7 | Inside Washer | 1 | PTFE |
| 8 | Cam | 1 | Alloy Steel |
| 9 | O-ring (Pinion Top) | 1 | NBR |
| 10 | Bearing (Pinion Top) | 1 | Engineering Plastics |
| 11 | Pinion | 1 | Alloy Steel |
| 12 | O-ring (Pinion Bottom) | 1 | Engineering Plastics |
| 13 | Bearing (Pinion Bottom) | 1 | NBR |
| 14 | Plug | 2 | NBR |
| 15 | O-ring (Adjust Screw) | 2 | NBR |
| 16 | Washer (Adjust Screw) | 2 | Stainless Steel |
| 17 | Nut (Adjust Screw) | 2 | Stainless Steel |
| 18 | Adjust Screw | 2 | Stainless Steel |
| 19 | Piston | 2 | Cast Aluminum |
| 20 | Guide (Piston) | 2 | Engineering Plastics |
| 21 | Bearing (Piston) | 2 | Engineering Plastics |
| 22 | O-ring (Piston) | 2 | NBR |
| 23 | Spring-Integrated | 0~12 | Spring Steel |
| 24 | O-ring (End Cap) | 2 | NBR |
| 25 | End Cap | 2 | Cast Aluminum |
| 26 | Cap Screw | 8 | Stainless Steel |
| 27 | Stop Screw | 2 | Stainless Steel |
| 28 | Nut ( Stop Screw) | 2 | Stainless Steel |
